Resources

Scientific & Prototyping Support
Laboratory-based facilities that enable science startups to conduct proof-of-concept and prototype development

 

Optics Lab

Optics Lab is well equipped with Spectrometers & Spectroflurometer covering Deep UV-NIR portion of the electromagnetic spectrum.

For more details :https://tinkeringlab.co.in/optics-lab/ 

Electronics Lab

Electronics Lab is well equipped with following 

For more details :https://tinkeringlab.co.in/instrumentation/ 

Design & Prototyping Lab

Design & Prototyping Lab is well equipped with following setup

For more details: https://tinkeringlab.co.in/prototyping-resources/ 

Processing Lab

Processing Lab is well equipped heavy duty instruments for rapid prototyping.

Mechanical Fab Lab

Our Mechanical Fab Lab is well equipped with following hardware and power tools.

  • Power tools: Dremel tools, jig-saw, angle grinder and many more.
  • Measurement tools: Screw gauge, Vernier calliper, level gauge, inclinometer,combination/try square, dial gauge, measuring tape. IR thermometer etc.
  • Fasteners and clamps: Types of screws and screwdrivers, washers and nuts.
  • Rivets and riveter. Bar clamp, F- and C-clamps, vice grip. Zip ties and hose clips etc.
  • Types of adhesives and tapes. Glue gun. Heat gun.
  • Hand tools: Plier, chisel, types of hammers, crowbar, spanner and many more
  • Cutting tools: Handsaw, hacksaw, aviation snip, snap-off knife, glass cutter etc.
  • Polishing tools: Metal files, random orbital sander (types of sandpaper), bench grinder.
  • Drilling & Tapping tools: Drill driver and electric drill, bench drill, types of drill bits,Center punch.

Rupee Centre

Rupee center instruments are used in research, development, alteration of pulp characteristics of optimizing paper and studying of board product properties before going into commercial production.